Special Control Cables

    There are several control cables that allow a single Pioneer DVD-V7400 or DVD-V7300D industrial DVD player to be controlled. They typically have one, two, or three pushbutton switches connected to a cable that is then plugged into the back of the Pioneer player. Each of these serves a different purpose, but most of them can be used to start playback of a DVD, and some can do much more complex things.

    Some of these cables trigger what are known as "Stack Commands" in the player. Stack commands are a way of defining a series of commands in the player that can then be triggered by an outside event, such as a switch or a sensor. These stack commands can be a simple command, such as play a chapter or series of frames, or they can be much more complex sequences. For example, you might set a sequence to play chapter 1 through 3 then jump to title 2 and play frames 1 through 1000, then jump to title 3 and play chapter 5 in a loop until another button is pressed. The Pioneer user manual that comes with the player has a complete section on setting the stack commands.

Special Control Cable shown is an SPCable-Stack2. Shown with the optional KioskButton-RD and KioskButton-BL.

    The following standard cables are typically available to ship within 24 - 48 hours. Prices shown are for the cable assembly alone. Optional switches or sensors are available seperately. See our KioskButton for a high reliability push-button switch. Contact us for quotes on any other custom cables or controllers that you need.

• SPCable-Play
  • Accepts a single switch or sensor. When triggered, it is the same as hitting the "Play" button on the Pioneer's remote control. Requires one pushbutton switch or sensor (sold seperately).
  • 10 foot = $100
  • 20 foot = $120

• SPCable-Stack1
  • Accepts a single switch or sensor. When triggered, it causes the Pioneer player's "Stack Command #1" to be executed. The Stack Command is programmed into the player by you, and can consist of a series of commands. Requires one pushbutton switch or sensor (sold seperately).
  • 10 foot = $100
  • 20 foot = $120

• SPCable-Stack2
  • Accepts two switches or sensors. When triggered, they cause the Pioneer player's "Stack Command #1" and "Stack Command #2" to be executed.The Stack Commands are programmed into the player by you, and each can consist of a series of commands. Requires two pushbutton switches or sensors (sold seperately).
  • 10 foot = $120
  • 20 foot = $140

• SPCable-Stack3
  • Accepts three switches or sensors. When triggered, they cause the Pioneer player's "Stack Command #1", "Stack Command #2", and "Stack Command #3" to be executed.The Stack Commands are programmed into the player by you, and each can consist of a series of commands. Requires three pushbutton switches or sensors (sold seperately).
  • 10 foot = $140
  • 20 foot = $160

• SPCable-Enter
  • Accepts a single switch or sensor. When triggered it is the same as hitting the "Enter" button on the Pioneer's remote control. Requires one pushbutton switch or sensor (sold seperately).
  • 10 foot = $100
  • 20 foot = $120

• SPCable-Arrows
  • Accepts five switches (or sensors). When triggered, they are the same as hitting the "Up Arrow", "Down Arrow", "Left Arrow", "Right Arrow", and "Enter" buttons on the Pioneer's remote control. Requires five pushbutton switches or sensors (sold seperately).
  • 10 foot = $150
  • 20 foot = $170